Skip to main content

SCS Flavor Naming Standard

Introduction

This is the standard v1.0 for SCS Release 0. Note that we intend to only extend it (so it's always backwards compatible), but try to avoid changing in incompatible ways.

Motivation

In OpenStack environments there is a need to define different flavors for instances. The flavors are pre-defined by the operator, the customer can not change these. OpenStack providers thus typically offer a large selection of flavors.

While flavors can be discovered (openstack flavor list), it is helpful for users (DevOps teams), to have

  • A naming scheme that is used across all SCS flavors, so flavor names have the same meaning everywhere.
  • Have a guaranteed set of flavors available on all SCS clouds, so these do not need to be discovered.

While not all details will be encoded in the name, the key features should be obvious: Number of vCPUs, RAM, Root Disk. Extra features are important as well: There will be flavors with GPU support, fast disks for databases, memory-heavy applications, and other useful aspects of an instance.

It may also be important to make the CPU generation clearly recognisable, as this is always a topic in discussions with customers.

Proposal

Type of information included

We believe the following characteristics are important in a flavour description:

TypeDescription
GenerationCPU Generation
Number of CPUNumber of vCPUs - suffixed by L,V,T,C (see below)
Amount of RAMAmount of memory available for the VM
Performance ClassAbility to label high-performance CPUs, disks, network
CPU TypeX86-intel, X86-amd, ARM, RISC-V, Generic
"bms"Bare Metal System (no virtualization/hypervisor)

Complete Proposal

PrefixCPUSuffixRAM[GiB]optional: Disk[GB]optional: Disk typeoptional: extra features
SCS-NL/V/T/C[i]:N[u][o][:[Mx]N][n/s/l/p][-hyp][-hwv]-[arch[N][h][-[G/g]X[N][:M[h]]][-ib]

(Note that N and M are placeholders for numbers here).

Proposal Details

[REQUIRED] CPU Suffixes

SuffixMeaning
Cdedicated Core
Tdedicated Thread (SMT)
VvCPU (oversubscribed)
LvCPU (heavily oversubscribed)

Baseline

Note that vCPU oversubscription for a V vCPU should be implemented such, that we can guarantee at least 20% of a core in >99% of the time; this can be achieved by limiting vCPU oversubscription to 5x per core (or 3x per thread when SMT/HT is enabled) or by more advanced workload management logic. Otherwise L (low performance) must be used. The >99% is measured over a month (1% is 7.2h/month).

Note that CPUs must use latest microcode to protect against CPU vulnerabilities (Spectre, Meltdown, L1TF, etc.). We expect that microcode gets updated within less than a month of a new release; for CVSS scores above 8, we expect less than a week. The provider must enable at least all mitigations that are enabled by default in the Linux kernel. CPUs that are susceptible to L1TF (intel x86 pre Cascade Lake) must switch off hyperthreading OR (in the future) use core scheduling implementations that are deemed to be secure by the SCS security team, or declare themselves as insecure with the i suffix (see below).

Higher oversubscription

Must be indicated with a L vCPU type (low performance for > 5x/core or > 3x/thread oversubscription and the lack of workload management that would prevent worst case performance < 20% in more than 7.2h per month).

Insufficient microcode

Not using these mitigations must be indicated by an additional i suffix for insecure (weak protection against CPU vulnerabilities through insufficient microcode, lack of disabled hyperthreading on L1TF susceptible CPUs w/o effective core scheduling or disabled protections on the host/hypervisor).

Examples

  • SCS-2C:4:10n
  • SCS-2T:4:10n
  • SCS-2V:4:10n
  • SCS-2L:4:10n
  • SCS-2Li:4:10n
  • SCS-2:**4:10n - CPU suffix missing
  • SCS-2iT:4:10n - This order is forbidden

[REQUIRED] Memory

Baseline

We expect cloud providers to use ECC memory. Memory oversubscription is not recommended. It is allowed to specify half GiBs (e.g. 3.5), though this is discouraged for larger memory sizes (>= 10GiB).

No ECC

If no ECC is used, the u suffix must indicate this.

Enabled Oversubscription

You have to expose this with the o sufffix.

Examples

  • SCS-2C:4:10n
  • SCS-2C:3.5:10n
  • SCS-2C:4u:10n
  • SCS-2C:4o:10n
  • SCS-2C:4uo:10n
  • SCS-2C:4ou:10n - This order is forbidden

[OPTIONAL] Disk sizes and types

Disk typeMeaning
nNetwork shared storage (ceph/cinder)
hLocal disk (HDD: SATA/SAS class)
sLocal SSD disk
pLocal high-perf NVMe

Baseline

Note that disk type might be omitted — the user then can not take any assumptions on what storage is provided for the root disk (that the image gets provisioned to).

It does make sense for n to be requested explicitly to allow for smooth live migration. h typically provides latency advantages vs n (but not necessarily bandwidth and also is more likely to fail), s and p are for applications that need low latency (high IOPS) and bandwidth disk I/O. n storage is expected to survive single-disk and single-node failure.

If the disk size is left out, the cloud is expected to allocate a disk (network or local) that is large enough to fit the root file system (min_disk in image). This automatic allocation is indicated with : without a disk size. If the : is left out completely, the user must create a boot volume manually and tell the instance to boot from it or use the block_device_mapping_v2 mechanism explicitly to create the boot volume from an image.

Multi-provisioned Disk

The disk size can be prefixed with Mx prefix, where M is an integer specifying that the disk is provisioned M times.

Examples

  • SCS-2C:4:10n
  • SCS-2C:4:10s
  • SCS-2C:4:10s-bms-z3
  • SCS-2C:4:3x10s - Cloud creates three 10GB SSDs
  • SCS-2C:4:3x10s-bms-z3
  • SCS-2C:4:10 - Cloud decides disk type
  • SCS-2C:4:10-bms-z3
  • SCS-2C:4:n - Cloud decides disk size (min_disk from image or larger)
  • SCS-2C:4:n-bms-3
  • SCS-2C:4: - Cloud decides disk type and size
  • SCS-2C:4:-bms-z3
  • SCS-2C:4:-bms-z3h-GNa:64-ib
  • SCS-2C:4:-ib
  • SCS-2C:4 - You need to specify a boot volume yourself (boot from volume, or use block_device_mapping_v2)
  • SCS-2C:4-bms-z3
  • SCS-2C:4:3x - Cloud decides disk type and size and creates three of them (FIXME: Is this useful?)
  • SCS-2C:4:3xs - Cloud decides size and creates three local SSD volumes (FIXME: useful?)
  • SCS-2C:4:3x10 - Cloud decides type and creates three 10GB volumes
  • SCS-2C:4:1.5n - You must not specify disk sizes which are not in full GiBs

[OPTIONAL] Hypervisor

The default Hypervisor is assumed to be KVM. Clouds, that offer different hypervisors or Bare Metal Systems should indicate the Hypervisor according to the following table:

hypMeaning
kvmKVM
xenXen
vmwVMware
hyvHyper-V
bmsBare Metal System

Examples

  • SCS-2C:4:10n
  • SCS-2C:4:10n-bms
  • SCS-2C:4:10n-bms-z3h

[OPTIONAL] Hardware virtualization / Nested virtualization

If the instances that are created with this flavor support hardware-accelerated virtualization, this can be reflected with the -hwv flag (after the optional Hypervisor flag). On x86, this means that in the instance, the CPU flag vmx (intel) or svm (AMD) is available. This will be the case on Bare Metal flavors on almost all non-ancient x86 CPUs or if your virtualization hypervisor is configured to support nested virtualization. Flavors without the -hwv flag may or may not support hardware virtualization (as we recommend enabling nesting, but don't require flavor names to reflect all capabilities. Flavors may overdeliver ...)

Examples

  • SCS-2C:4:10 - may or may not support HW virtualization in VMs
  • SCS-2C:4:10-kvm-hwv
  • SCS-2C:4:10-hwv - not recommended, but allowed
  • SCS-2C:4:10-hwv-xen - illegal, wrong ordering

[OPTIONAL] CPU Architecture Details

Arch details provide more details on the specific CPU:

  • Vendor
  • Generation
  • Frequency

Generation and Vendor

The generations are vendor specific and can be left out. Not specifying arch means that we have a generic CPU (x86-64).

Generationi (Intel x86-64)z (AMD x86-64) a (AArch64)r (RISC-V)
0pre Skylakepre Zenpre Cortex A76TBD
1SkylakeZen-1 (Naples)A76/NeoN1 classTBD
2Cascade LakeZen-2 (Rome)A78/x1/NeoV1 classTBD
3Ice LakeZen-3 (Milan)A71x/NeoN2 (ARMv9)TBD
4Zen-4 (Genoa)TBD

It is recommended to leave out the 0 when specifying the old generation; this will help the parser tool, which assumes 0 for an unspecified value and does leave it out when generating the name for comparison. In other words: 0 has a meaning of "rather old or unspecified".

Frequency Suffixes

SuffixMeaning
h>2.75GHz all-core
hh>3.25GHz all-core
hhh>3.75GHz all-core

Examples

  • SCS-2C:4:10n
  • SCS-2C:4:10n-z
  • SCS-2C:4:10n-z3
  • SCS-2C:4:10n-z3h
  • SCS-2C:4:10n-z3hh
  • SCS-2C:4:10n-bms-z
  • SCS-2C:4:10n-bms-z3
  • SCS-2C:4:10n-bms-z3
  • SCS-2C:4:10n-bms-z3h
  • SCS-2C:4:10n-bms-z3hh

[OPTIONAL] Extra features

Note that these are optional — it is recommended for providers to encode this information into the flavor name, so there is a systematic way of differentiating flavors. Providers could leave it out however, leaving it to extra_specs to make these flavor capabilities discoverable. Nothing prevents providers from registering the same flavor under a secondary (or tertiary) name.

-GX[N][:M[h]] indicates a Pass-Through GPU from vendor X of gen N with M compute units / SMs / EUs exposed. -gX[N][:M[h]] indicates a vGPU from vendor X of gen N with M compute units / SMs / EUs assigned.

Note that the vendor letter is mandatory, generation and compute units are optional.

GPUVendor
NnVidia
AAMD
IIntel

Generations could be nVidia (f=Fermi, k=Kepler, m=Maxwell, p=Pascal, v=Volta, t=turing, a=Ampere, ...), AMD (GCN-x=0.x, RDNA1=1, RDNA2=2), intel (Gen9=0.9, Xe(12.1)=1, ...), ... (Note: This may need further work to properly reflect what's out there.)

The optional h suffix to the comput unit count indicates high-performance (e.g. high freq or special high bandwidth gfx memory such as HBM); h can be duplicated for even higher performance.

-ib indicates Infiniband networking.

More extensions will be forthcoming.

Extensions need to be specified in the above-mentioned order.

Proposal Examples

ExampleDecoding
SCS-2C:4:10n2 dedicated cores (x86-64), 4GiB RAM, 10GB network disk
SCS-8Ti:32:50p-i18 dedicated hyperthreads (insecure), Skylake, 32GiB RAM, 50GB local NVMe
SCS-1L:1u:51 vCPU (heavily oversubscribed), 1GiB Ram (no ECC), 5GB disk (unspecific)
SCS-16T:64:200s-GNa:64-ib16 dedicated threads, 64GiB RAM, 200GB local SSD, Infiniband, 64 Passthrough nVidia Ampere SMs
SCS-4C:16:2x200p-a14 dedicated Arm64 cores (A78 class), 16GiB RAM, 2x200GB local NVMe drives
SCS-1V:0.51 vCPU, 0.5GiB RAM, no disk (boot from cinder volume)

Standard SCS flavors

These are flavors expected to exist on standard SCS clouds (x86-64).

We expect disk sizes to be 5, 10, 20, 50, 100, 200, 500, 1000GB, 2000GB. We expect a typical CPU

GiB
ratio of 1:4.

vCPU:RAM ratioMandatory Flavors
1:4SCS-1V:4, SCS-1V:4:10
2:8SCS-2V:8, SCS-2V:8:20
4:16SCS-4V:16, SCS-4V:16:50
8:32SCS-8V:32, SCS-8V:32:100
1:2SCS-1V:2, SCS-1V:2:5
2:4SCS-2V:4, SCS-2V:4:10
4:8SCS-4V:8, SCS-4V:8:20
8:16SCS-8V:16, SCS-8V:16:50
16:32SCS-16V:32, SCS-16V:32:100
1:8SCS-1V:8, SCS-1V:8:20
2:16SCS-2V:16, SCS-2V:16:50
4:32SCS-4V:32, SCS-4V:32:100
1:1SCS-1L:1, SCS-1L:1:5

Note that all vCPUs are oversubscribed — the smallest 1L:1 flavor allows for heavy oversubscription (note the L), and thus can be offered very cheaply — imagine jump hosts ... Disks types are not specified (and expected to be n or h typically).

The design allows for small clouds (with CPUs with 16 Threads, 64GiB RAM compute hosts) to offer all flavors.

Note: Compared to previous drafts, we have heavily reduced the variations on disk sizes — this reflects that for the standard networked cinder disks, you can pass blockdevice_mapping_v2 on server (VM) creation to allocate a boot disk of any size you desire. We have scaled the few mandatory disk sizes with the amount of RAM. For each flavor there is also one _without a pre-attached disk — these are meant to be used to boot from a volume (either created beforehand or allocated on-the-fly with block_device_mapping_v2, e.g. openstack server create --flavor SCS-1V:2 --block-device-mapping sda=IMGUUID:image:12:true to create a bootable 12G cinder volume from image IMGUUID that gets tied to the VM instance lifecycle.)

Naming policies

To be certified as an SCS compliant x86-64 IaaS platform, you must offer all standard SCS flavors according to the previous section. (We may define a mechanism that allows exceptions to be granted in a way that makes this very transparent and visible to clients.)

You are allowed to understate your performance; you may implement a SCS-1Vl:1:5 flavor with a flavor that actually implements SCS-1T:1:5n (i.e. you dedicate a secured hyperthread instead of high oversubscription) or even SCS-1D:1.5:8s (1 dedicated core, 50% more RAM and a 8GiB SSD).

We expect all cloud providers to offer the short, less specific flavor names (such as SCS-8V:32:100). Larger providers that offer more details are expected to still also offer the short variants for usability and easier portability, even beyond the mandated flavors.

You must be very careful to expose low vCPU guarantees (L instead ov V), insecure hyperthreading/microcode i, non-ECC-RAM u, memory oversubscription o. Note that omitting these qualifiers is overstating your security, reliability or performance properties and may be reason for clients to feel betrayed or claim damages. It might, in extreme cases, also cause SCS to withdraw certification along with public statements.

You may offer additional SCS- flavors, following the naming scheme outlined here.

You may offer additional flavors, not following above scheme.

You must not offer flavors with the SCS- prefix which do not follow this naming scheme. You must not extend the SCS naming scheme with your own suffices; you are encouraged however to suggest extensions that we can discuss and add to the official scheme.

Note that all letters are case-sensitive. In case you wonder: Feature indicators are capitalized, modifiers are lower case. (An exception is the uppercase -G for a passthrough GPU vs. lowercase -g for vGPU.)

Rationale

Note that we expect most clouds to prefer short flavor names, not indicating CPU details or hypervisor types. See above list of standard flavors to get a feeling.

However, more successful providers will often need to differentiate their offerings in response to customer demand and allow customers to request flavors with specific detailed properties. The goal of this proposal is to avoid providers to invent their own names and then refer customers to extra_specs or worse a non-machine-readable service description to find out the details.

So a cloud provider might well evolve from offering SCS-8T:16:50 to offering SCS-8T:16:50n, SCS-8T:16:50n-i2 and SCS-8T:16:50n-a2 to specify that he is using network disks and offer a choice b/w intel Cascade-Lake and AMD Rome. We would expect the cloud provider to still offer the generic flavor SCS-8C:16:50 and allow the scheduler (placement service) to pick both more specific types (or just one if e.g. capacity management considerations suggest so). We would expect providers in such cases to ensure that the price of a requested flavor does not depend on the scheduler decisions.

We are looking into the metadefs mechanism and extra_specs to allow customers to ask for specific flavor properties without the need to encode all these flavor details into the flavor name, so the optional pieces may not be needed much. However, there must be a way to request flavor properties without encoding the need into an image — this indirection is considered broken by the SCS team.

Validation

There is a script in flavor_name_check.py which can be used to decode, validate and construct flavor names. This script must stay in sync with the specification text.

Ensure you have your OpenStack tooling (python3-openstackclient, OS_CLOUD) setup and call tools/flavor-name-check.py -c $(openstack flavor list -f value -c Name) to get a report on the flavor list compliance of the cloud environment.

Beyond SCS: Gaia-X

Some providers might offer VM services ("IaaS") without trying to adhere to SCS standards, yet still finding the flavor naming standards useful. The Gaia-X Technical Committee's Provider Working Group (WG) would seem like a logical place for such discussions then. If so, we could replace the SCS- prefix with a GX- prefix and transfer the naming scheme governance from the SCS project to the Gaia-X Provider WG (where we participate). SCS certification would then reference the Gaia-X flavor naming standard as a requirement.